Tensile Testing Machine

Approx. Rs 3.5 Lakh / NumberGet Latest Price

Tensile strength is the stress at which a material breaks or permanently deforms. There are three definitions of tensile strength, yield strength, ultimate strength and breaking strength. Tensile tests are usually carded out on wire, strip or machined samples with either circular or rectangular cross section. Test pieces are screwed into or gripped in jaws and stretched by moving the grips apart at a constant rate while measuring the load and the grip separation. This data is plotted as load vs extension and then converted to engineering stress (load/original area) vs engineering strain (fractional change in length over the test section assuming the deformation is uniform). In special circumstances, the actual stress and strain may be calculated if the true cross section is measured during the test.

features:
ultrahigh-pressure stroke resistant.
easy to operate
sturdy design

specifications:
load capacity: 5000 KGF
Accuracy: ±1%
max cross head: 800mm
cross head speed: 1mm/min to 500mm/min with speed control
load cell accuracy: ±1%
measurement unit: kilogram, newton
pc software for showing load unit, elongation, max load
system compitiable for string, cable, rope, wire, rod, cloth, paper, elasic material with proper attachements.
system could measure tensile, compression, shear, peel
system can display and print numeric results with system setup
system can have pre loaded algorithm for different materials with user setup.
warranty: 1 years with software & hardware with technical support
training: about system & technology, by qualified trainer on site.
remark :- we are desgining and custumised above machine as per custmers requirement.
Request
Callback

Additional Information:

• Item Code: KJE1117
• Production Capacity: 2
• Delivery Time: 15
• Packaging Details: WOODEN

Approx. Rs 95,000 / NumberGet Latest Price

Product description:

Tensile Strength Tester is applicable in the test of physical mechanical properties of plastic films, laminated materials, flexible packaging materials, plastic flexible tube, adhesives, adhesive tapes, pressure sensitive tape, adhesive bandage (plaster), release paper, protective film, flip off cap, foil, diaphragm, back sheet, non-woven, rubber and paper fiber, etc.

Tensile Strength Tester can perform the test items of tensile, peeling, deformation, tearing, heat seal, adhesive, puncture force, open force, low-speed unwinding force and unsnapping force, etc.

Tensile Strength Tester can do the test of tensile, tensile resistance and elongation ratio test, hot seal strength, tearing strength, 180 degree peel (include T peel), and 90 degree peel.

Tensile Strength Tester conforms to standards of ASTM E4, ASTM D828, ASTM D882, ASTM D1938, ASTM D3330, ASTM F88, and ASTM F904, ISO 37, JIS P8113.

Features:

Professional testing items for packaging industry to realize quick functional tests.

Minicomputer control, LCD displays data, results and curves.

Seven independent testing programs, including tensile, peeling, tearing and heat seal, etc.

Data Memory function when power failure, overload protection, position limit protection and auto return.

Multi-functions of parameter set, printing, inquiry, clear and calibration, etc.

Technical Data:

Specification : 500N or 50N (optional)

Accuracy : ±0.5%of full scale reading

Test Speed : 50 100 150 200 250 300 500mm/min

Test Width : 30mm(standard clamp) 50mm(optional)

Stroke : 1000mm

PARAMTM XLW(G6) Tensile Strength Tester with 6 test stations

PARAMTM XLW Tensile Strength Tester with 1% accuracy

PERMETM OX2/230 Oxygen Permeation Test System

PERMETM W3/330 Water Vapor Permeation Test System

PERMETM VAC-V1 Gas Permeation Tester

Related products:

Additional Information:

• Item Code: KJE901
• Production Capacity: 2
• Delivery Time: 15
• Packaging Details: WOODEN

Approx. Rs 1.25 Lakh / NumberGet Latest Price

Tensile strength is the stress at which a material breaks or permanently deforms. There are three definitions of tensile strength, yield strength, ultimate strength and breaking strength. Tensile tests are usually carded out on wire, strip or machined samples with either circular or rectangular cross section. Test pieces are screwed into or gripped in jaws and stretched by moving the grips apart at a constant rate while measuring the load and the grip separation. This data is plotted as load vs extension and then converted to engineering stress (load/original area) vs engineering strain (fractional change in length over the test section assuming the deformation is uniform). In special circumstances, the actual stress and strain may be calculated if the true cross section is measured during the test.

features:

ultrahigh-pressure stroke resistant.

easy to operate

sturdy design

specifications:

load capacity: 2. 5k n ( 250 kg )

accuracy: ±1%

max cross head: 800mm

cross head speed: 1mm/min to 500mm/min with speed control

load cell accuracy: ±1%

measurement unit: kilogram, newton

pc software for showing load unit, elongation, max load

system compitiable for string, cable, rope, wire, rod, cloth, paper, elasic material with proper attachements.

system could measure tensile, compression, shear, peel

system can display and print numeric results with system setup

system can have pre loaded algorithm for different materials with user setup.

warranty: 1 years with software & hardware with technical support

training: about system & technology, by qualified trainer on site.

remark :- we are desgining and custumised above machine as per custmers requirement.

Approx. Rs 3.5 Lakh / NumberGet Latest Price

Tensile strength is the stress at which a material breaks or permanently deforms. There are three definitions of tensile strength, yield strength, ultimate strength and breaking strength. Tensile tests are usually carded out on wire, strip or machined samples with either circular or rectangular cross section. Test pieces are screwed into or gripped in jaws and stretched by moving the grips apart at a constant rate while measuring the load and the grip separation. This data is plotted as load vs extension and then converted to engineering stress (load/original area) vs engineering strain (fractional change in length over the test section assuming the deformation is uniform). In special circumstances, the actual stress and strain may be calculated if the true cross section is measured during the test.

features:
ultrahigh-pressure stroke resistant.
easy to operate
sturdy design

specifications:
load capacity: 2000 KGF
accuracy: ±1%
max cross head: 800mm
cross head speed: 1mm/min to 500mm/min with speed control
load cell accuracy: ±1%
measurement unit: kilogram, newton
pc software for showing load unit, elongation, max load
system compitiable for string, cable, rope, wire, rod, cloth, paper, elasic material with proper attachements.
system could measure tensile, compression, shear, peel
system can display and print numeric results with system setup
system can have pre loaded algorithm for different materials with user setup.
warranty: 1 years with software & hardware with technical support
training: about system & technology, by qualified trainer on site.
remark :- we are desgining and custumised above machine as per custmers requirement.
Request
Callback

Approx. Rs 4 Lakh / NumberGet Latest Price

        The Machine is Designed and developed  as per relevant Indian ,  International standard for  the

Physical and mechanical properties like Tensile, Elongation, Compression, Flexural, Modulus,

Peel, Bond strength test required of  different samples like Automobiles parts, Steel Ropes, Wires, Packaging items, Safety holding accessories, Lifting slings, Belts, Geo textile materials, Hard and Wooden materials, and many more as per special products & would be   customized for above products manufacturing major industry for Q.C. & R & D lab. Available in all range from 1000, 2000, 3000, 5000, 7500,10000 KGS and customized

        The Machine is Designed and developed  as per relevant Indian ,  International standard for  the

Physical and mechanical properties like Tensile, Elongation, Compression, Flexural, Modulus,

Peel, Bond strength test required of  different samples like Automobiles parts, Steel Ropes, Wires, Packaging items, Safety holding accessories, Lifting slings, Belts, Geo textile materials, Hard and Wooden materials, and many more as per special products & would be   customized for above products manufacturing major industry for Q.C. & R & D lab. Available in all range from 1000, 2000, 3000, 5000, 7500,10000 KGS and customized

WITH TESTING FACILITY:
� Tensile Strength
� Compression strength
� Elongation Test
� Peel bond test
� COF Test
� Flexure Test
� Shear Test
� FEATURE: Zero, Peak, Over Load, Over Travel Safety, Auto Reverse.
� UNIT CONVERSION (LOAD) : kN, Kg,
� UNIT CONVERSION (ELONGATION): mm,
� CONTROL: UP, DOWN, STOP & Speed through computer.Computer configuration:
� Desktop & CPU
� Mouse, keyboard.
� Pen drive with software
� LCD(monitor)
Documents :
� With Operating Manual
� With NABL calibration certificate (1 year validity )
� With One Year Warranty Certificate

Additional Information:

• Item Code: KJI100
• Production Capacity: 100
• Delivery Time: 1 MONTH
• Packaging Details: WOODEN

Approx. Rs 70 Lakh / PieceGet Latest Price

Benefits of equipment’s are  :-

1-Tensile testing, Compression , Cyclic loading, Elongation testing, Hold Relaxation Testing, and many more customized….

2- Data recording, Data mining with online Skada software with numeric and graphical values, automatic generation of Reports.

3-  The machine also can be designed for so many others safety products and all major industries like Electrical Insulators ,automobile, aeronautical, mining, navy, Railways , steels wires etc.. ……

Additional Information:

• Item Code: HTTM30
• Production Capacity: 1 PER MONTH
• Delivery Time: 1 MONTH
• Packaging Details: OPEN

Approx. Rs 75,000 / NumberGet Latest Price

Product description:

This Peel Testing Equipment can do tensile test, tear test, peel test, bond test with different clamps for yarn,paper, tape, film,rubber and other kind of materials.

unversal test equipment uses the motor to drive screw to move fixtures. Fix sample between upper and lower fixture and pull sample by the upper fixture upward with specified speed. The load cell connecting with upper fixture will sense the force and then convert it into voltage sign to the display screen. Force value will be displayed automatically on the screen.

Applications:

Deformation under defined load: Test deformation under defined load of tested sample

Load under defined deformation: Test load under defined deformation of tested sample

Software can issue report with results for max. force, elongation, tensile strength, peel strength, tear strength, compression strength, etc.

This machine can do different test as per customer requirement such as peel test, tear test, compression test, bend test with different clamps.

Additional Information:

• Production Capacity: 10
• Delivery Time: 10
• Packaging Details: WOODEN

Approx. Rs 1.1 Lakh / NumberGet Latest Price

Tensile strength is the stress at which a material breaks or permanently deforms. There are three definitions of tensile strength, yield strength, ultimate strength and breaking strength. Tensile tests are usually carded out on wire, strip or machined samples with either circular or rectangular cross section. Test pieces are screwed into or gripped in jaws and stretched by moving the grips apart at a constant rate while measuring the load and the grip separation. This data is plotted as load vs extension and then converted to engineering stress (load/original area) vs engineering strain (fractional change in length over the test section assuming the deformation is uniform). In special circumstances, the actual stress and strain may be calculated if the true cross section is measured during the test.
features:
ultrahigh-pressure stroke resistant.
easy to operate
sturdy design
specifications:
load capacity: 2. 5k n ( 250 kg )
accuracy: ±1%
max cross head: 800mm
cross head speed: 1mm/min to 500mm/min with speed control
load cell accuracy: ±1%
measurement unit: kilogram, newton
pc software for showing load unit, elongation, max load
system compitiable for string, cable, rope, wire, rod, cloth, paper, elasic material with proper attachements.
system could measure tensile, compression, shear, peel
system can display and print numeric results with system setup
system can have pre loaded algorithm for different materials with user setup.
warranty: 1 years with software & hardware with technical support
training: about system & technology, by qualified trainer on site.
remark :- we are desgining and custumised above machine as per custmers requirement.

Additional Information:

• Item Code: KJE11119
• Production Capacity: 2 PER MONTH
• Delivery Time: 15
• Packaging Details: WOODEN