Testing equipments

Approx. Rs 34,000 / pieceGet Latest Price

• Measuring range and graduation value of dial : 0-1000kN
• Max.Vertical clearance between platens :260mm
• Platens dimension : 220 x 220mm..
• Net weight : About 250kg
• Max.Capacity : 1000kN
• Very best imported quality long life power pack used.

Additional Information:

• Item Code: 1000kn
• Port of Dispatch: MUMBAI
• Production Capacity: 50 PER MONTHS
• Delivery Time: EX STOCK UPTO 3 NOS.
• Packaging Details: WOODEN PACKING. WITH CALIBRATION CERTIFICATION.

Approx. Rs 65,000 / NumberGet Latest Price

We have marked a distinct position in the market by providing Los Angles Abrasion Testing Machine. The provided testing machine is manufactured from high quality components & leading techniques in adherence with the set norms of industry. This testing machine is checked on numerous quality parameters in order to deliver defect free range. As well, this testing machine is appreciated in the market for its less maintenance.

Features:

Precisely engineered

Smooth functioning

Noiseless operation

General Description & Specification:
Consists of a hollow steel cylinder, closed at both ends, having an inside diameter of 700mm and inside length of 500mm. The cylinder mounted on a sturdy frame on ball bearings. The opening is closed dust tight with a removable bolted cover in place. A detachable shelf which extends through the drum catches the abrasive charge and does not allow it to fall on the cover. The drum is rotated at a speed of 30-33 RPM by an electric motor through a heavy duty reduction gear. Fitted with revolution counter and push button starter. Supplied complete with a tray for collection of the material. Abrasive charge consists of set of 12 Nos. cast iron spheres or steel spheres (hardened steel balls) approximately 48mm diameter each weigh between 390-445 gram. Complete as above.

Optional Accessories:
The following accessories are not part of the standard supply and are supplied at an extra cost.

• Laboratory Oven.
• Test Sieve 1.7mm
• Electronic Balance of 15 kg x 1 gm
• Spare Abrasive charge.

Additional Information:

• Item Code: 555
• Production Capacity: na
• Delivery Time: na
• Packaging Details: na

Approx. Rs 2.5 Lakh / PieceGet Latest Price

• Heavy duty design
• Smooth functioning
• Needs less maintenance
• Digital models with pace rate indicators
• Micro Controller based models with automatic pace rate controllers
• Fully Automatic models
• High stability
• Self-aligning platen assembly
• Load Gauges are calibrated in kN against certified Proving Rings, traceable to NPL / NCCBM
• Suitable for testing cubes and cylinders of various sizes
• Using special platens, bricks can also be tested
• Logged data printing facility through a parallel port interface available in digital and micro controller ased versions
• Calibration process accredited by NABL

• Digital models with pace rate indicators
• Micro Controller based models with automatic pace rate controllers
• Semi Automatic models
• High stability
• Self-aligning platen assembly
• Load Gauges are calibrated in kN against certified Proving Rings, traceable to NPL / NCCBM
• Suitable for testing cubes and cylinders of various sizes
• Using special platens, bricks can also be tested
• Logged data printing facility through a parallel port interface available in digital and micro controller ased versions
• Calibration process accredited by NABL

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Approx. Rs 18 Lakh / NumberGet Latest Price

Being a reputed company, we are offering an encompassing gamut of Loading Frame with Pumping Unit. The given product is inspected by our quality experts on diverse parameters so as to assure its flawless range. This product is developed from the top notch material and latest techniques in fulfillment with international standards. Our valuable customers can easily avail this product from us in a given time frame at industry leading rates.
Features:
Precisely designed
Reliable operation
Smooth functioning

Specifications:
vertical size- ht- 2700 x wth- 1500 mm x Bridth-400 mm ,with surrounding peripheral vertical platens in side the 400 x 400 mm 'c' channel inner heavy duty stiffened by in side heavy duty 60 x 60 mm squire roads contentiously welded together with the channel section, in the center of 10 mm platen, also top and bottom 'c' section are cross stiffened by 60 mm square road perpendicular to horizontal welded square road
Top horizontal beam is customize to move up and down which will be sheeted through its nut and bolts unlocking
Even all four inner sides of 10 x 500 mm platen will be designed customize by giving 12 mm holes at every 6" intervals to locate, fix every things at desire level and height vertically and horizontally
All the platens are duly welded with heavy duty electrical weld joint with specifics materials welding roads and complete frame will be tested upto full load of 50 ton

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Approx. Rs 90,000 / NumberGet Latest Price

• High efficiency
• Rigid design
• Needs less maintenance

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Approx. Rs 30,000 / NumberGet Latest Price

Approx. Rs 22,500 / NumberGet Latest Price

• As Per IS 2514
• Vibrating Table for compaction concrete cube, cylinders.
• The Table Deck size 50cm x 50 cm and has stops along its edges to prevent Moulds from walking off the table during vibration
• The variably pitch pulley arrangement permits the frequency to be varied sleeplessly between a maximum of 3600 vibrations down to 2600 vibration per minute
• A speed regulation handle is provided for increasing or decreasing the frequency
• The vibrator is mounted on a cushioned steel vibrating deck
• A switch is provided for starting the motor operation on 440 V, 3 phase, A. C. supply. CABINET TYPE
• Vibrating Table, Table top 60 cm x 60 cms Vibrating Table, Table top 75 cms x 75 cms Vibrating Table top, . 1 meter x 1 meter

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 5-10 DAY

Approx. Rs 1.65 Lakh / NumberGet Latest Price

Additional Information:

• Item Code: KJE10
• Production Capacity: 10
• Delivery Time: 7
• Packaging Details: AS PER REQUIRE

Approx. Rs 1.65 Lakh / NumberGet Latest Price

• Three pressure gauges for indicating pressure in each cell are supplied apart from the main pressure gauge which indicates pressure in chamber.
• The concrete permeability apparatus comprises of a brass/ gunmetal cell of squares cross section mounted on a stand and a pressure chamber is connected to the cell through copper tubing and T-connector mounted on the stand with sleeve packed valve and rubber hose pipe with end connections.
• The cell assembly consists of one base plate, one metal funnel and one top plate, and a pressure tube is supplied to develop pressure in the chamber.
• The apparatus is supplied with a measuring cylinder 500cc to measure percolated quantity of water. Pressure can also be applied by a pressure air line or by a compressor.
• Available for sample of size 150mm dia X 150mm high.
• Available for sample of size 100mm dia X 100mm high.

• Compresssor with pressure gauge 0-20 kg/cm sq. with automatic pressure valve and pressure rubber hose.
• Suitable for 440 volts A.C. three phase.
• Specimen casting mould C.I. for 100mm dia X 100 mm high cylinders, Specimen casting mould C.I. for 150mm dia X 10mm high cylinders, Specimen casting mould C.I. for 150mm cubes, Blow stove 1/2 litre capacity, Resin, Bees Wax, Wire brush, Chissel, Spare glass cylinder 500cc capacity

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Approx. Rs 35,000 / NumberGet Latest Price

Sieve Shaker We offer Sieve Shaker. This Shaker reproduces both circular and tapping motion, Produces Circular and tapping motion with a uniform mechanical action which ensures accurate and dependable test results. This shaker is heavy in construction and no special foundation is required. The running parts operate in oil. electric motor runs the machine, the machine can accommodate six test sieves + set of Lid-pan but is supplied without sieves.

K.J.E. Make Sieve Shaker Machine:

The shaker is driven by a 1/4 h.p. motor through a reduction gear immersed in oil.

The sieve table dies not rotate but is inclined from the vertical axis and the direction of inclination changes progressively in clockwise direction.

If the stop-pin below the table is removed, the shaker can have a rotary motion.

In addition to this gyratory motion of the table, there is an upward downward movement ensuring that each square cm of the sieve is utilized.

A pair of rods and a holder are supplied.

The holder can be fixed on the top of the upper most sieve, and thus the sieve set is firmly held.

Suitable for operation form 230 volts, 50 cycles phase, A.C. supply.

Nett weight approx. 77 kg.

Additional Information:

• Production Capacity: 50
• Delivery Time: 1-5 DAY
• Packaging Details: WOODEN,PLASTIC ROLL